Clover Electronics Digital Camera HDC150 User Manual

INSTRUCTION  
MANUAL  
3D-DNR  
TRUE DAY/NIGHT IR CAMERA  
MODEL HDC150  
Copyright © 2009 Clover Electronics U.S.A. All Rights Reserved.  
 
5. If necessary, change the settings to get the best images depending on your application  
by using the button on the bottom of the camera.  
- Get rid of the capfor the OSD button by turning counter-clockwise and then  
change the settings (refer to the included instruction manual for OSD Control).  
- Turn the capclockwise to secure after changing the settings.  
6. Connect the one end of 100’ cable (supplied) to the BNC (F) of 5’ cable attached to  
the camera and the other end (BNC) of cable to the video devices such as DVR,  
monitor/TV. Plug the provided AC power supply to the DC jack (red) on the end of  
100’ cable.  
 
HOW TO ADJUST ANGLE OF VIEW  
1. Vari-focal lens①  
Easily changeable angle of view: 2.8 to 12mm  
2. Remove the sun-visorand turn the locking screws on the knobswith the  
provided hex-head wrench counter-clockwise to make easier adjustment for angle of  
view. Do not stamp your fingerprint on the lens and the window, which may affect  
picture quality.  
3. TW (Tele Wide)⑤  
Turn this adjustment ringclockwise or counter-clockwise to set the focal length.  
4. ∞↔N④  
Turn this adjustment ringclockwise or counter-clockwise to set the focus.  
5. After setting the focus and focal length, the locking screws on the knobsshould be  
securely fastened.  
 
Note:  
Apply the provided AC Power supply only.  
The total length of cable must not exceed 200’ including extension  
cable.  
TROUBLE SHOOTING  
If the camera does not function properly, check the following points before contacting the  
service center.  
Troubles  
Remedies  
No video  
Check the AC adapter and video cable  
between the camera and a monitor  
Check the brightness control on the  
monitor  
Check if the lens is stained. If dirty,  
clean it with soft and clean cloth  
The image on the screen is dark  
The image on the screen is dim  
The camera is not working properly, and Check if you have connected the  
the surface of the camera case is hot  
The contrast on the screen is too weak  
provided AC adapter  
Adjust the contrast feature of the  
monitor. If the camera is exposed under  
too strong light, change the position  
Does the camera face to directly to the  
sunlight or fluorescent light? Change the  
camera position  
The image on the screen flickers  
Picture rolls and jumps, scrambled  
picture  
Improper V-hold control. Setting on your  
monitor  
Picture smaller than screen  
House current may be too low  
SPECIFICATIONS  
Image sensor  
Total pixels  
Effective Pixels  
Scanning system  
Synchronization  
O.S.D  
1/3” SONY Super HAD CCD  
811(H) x 508(V)  
768(H) x 494(V)  
2:1 Interlace  
Internal/Line Lock  
Available  
 
Backlight  
Resolution  
S/N (Y signal)  
Min.illumination  
Off / HSBLC / BLC selectable  
550TV Lines(color),600TV Lines(B/W)  
52dB (AGC Off, Weight On)  
0.00006Lux @F1.2 (sens-up:x258, IR LED:  
ON)  
White Balance  
Sense-up  
3 DNR  
ATW / AWB / Manual / AWCSET  
Off / Auto / (Selectable limit x2 ~ x258)  
Off / On (1~50 level adjustable)  
Indoor / Outdoor / Off  
D-WDR  
D&N selection  
Digital zoom  
Voltage  
Current consumption  
Lens  
Operating temperature/Humidity  
Storage temperature/Humidity  
Dimensions  
Color / BW / Auto  
On(x32) / Off  
AC 24V / DC 12V(Dual voltage)  
LED On: 650 mA, LED Off: 180 mA  
DC Auto Iris Varifocal Lens (2.8mm-12mm)  
-10°C ~ +50°C. RH 95% Max.  
-20°C ~ +60°C. RH 95% Max.  
88 (W) x 105 (H) x 222 (D)mm  
3.2 Lbs  
Weight  
LIMITED 2 YEAR WARRANTY  
This warranty gives the original purchaser specific legal rights and you may also have  
other rights, which vary from state to state. If our products do not function because of any  
defect in material or workmanship, we will repair free of charges for 2 years on parts and  
labor from the date of original purchase. This warranty does not cover modification,  
abuse, incidental or consequential damages unless the state of owner’s residence specially  
prohibits limitations on incidental or consequential damages.  
HOW TO OBTAIN FACTORY SERVICE  
1. Original purchaser must fill out a warranty card and mail it to the factory with model  
number, serial number and the date of purchase.  
2. We will repair or replace, and return to the owner the system under this limited  
warranty.  
3. Please pack the system carefully and securely using the original packing materials,  
and send it prepaid and insured to: 13073 E. 166th St, Cerritos, CA 90703.  
4. Please include a check for $20.00 to cover the cost of return postage and handling. If  
the system is returned within the warranty period, please include a proof of purchase.  
If the system is out of warranty, you will receive an estimate of the repair cost for  
your approval before repair work will be begun.  
 
AVAILABLE ACCESSORIES  
CDR0460  
CDR4450  
CDR0860  
CDR1660  
CDR0850  
CDR1650  
CA100BP  
Stand-alone 4 CH Digital Video Recorder (DVR)  
Stand-alone 4 CH Digital Video Recorder (DVR)  
Stand-alone 8 CH Digital Video Recorder (DVR)  
Stand-alone 16 CH Digital Video Recorder (DVR)  
Stand-alone 8 CH Digital Video Recorder (DVR)  
Stand-alone 16 CH Digital Video Recorder (DVR)  
100’ BNC/Power to BNC/Power Extension cable and coupler  
PACKAGE INCLUDES  
1-True Day & Night Color Camera  
1-Universal Mounting Bracket & 100’ BNC/Power to BNC/Power cable  
1-UL Approved AC Power Supply  
1-Hardware Accessories Kit  
1-Instruction Manual  
1-Instruction Manual for OSD Control  
1-Warranty Registration Card  
 

Craftsman Saw 351268500 User Manual
Craftsman Snow Blower 53688614 User Manual
Cuisinart Toaster CPT 435 User Manual
Curtis MP3 Player MP2050UK User Manual
Dimplex Indoor Fireplace BF33ST User Manual
Edelbrock Automobile Parts R08463S User Manual
Edimax Technology Network Router AC M1000 User Manual
Furman Sound Power Supply PL PRO D II User Manual
Gefen Switch EXT HDMI13 242 User Manual
Global Machinery Company Drill MX1G100 User Manual