INVUETM
DESCRIPTION
DIMENSIONS
ASCENT enhances the rectilinear
form with a housing that blends
effortlessly to traditional or
ambitious architectural
5 5/16"
[135mm]
environments. ASCENT brings
two (2) housing sizes and a fluid
form to match the culture in
which it resides.
19 19/32" [497mm]
15 11/16" [298mm]
6 3/4" [171mm]
AES
ASCENT SITE
SMALL
EPA-Effective Projected Area: .85
ORDERING INFORMATION
4 2 - 1 7 5 W
SAMPLE NUMBER: AES-175-MH-MT-3S-BK-L
Metal Halide
High Pressure Sodium
Compact Fluorescent
10
6
Colors
Lamp Type
MH=Metal
Halide
Voltage
Optical System
2S=Type II
3S=Type III
4S=Type IV
5S=Type V
SL=Spill Light
Eliminator
Options &
Accessories
(See Below)
Product
Family
AES=ASCENT
Lamp
1
(add as suffix/must
specify)
BK=Black
AP=Grey
BZ=Bronze
WH=White
DP=Dark Platinum
GM=Graphite Metallic
120=120V
208=208V
240=240V
277=277V
347=347V
480=480V
DT=Dual-Tap
Wired 277V
MT=Multi-Tap
Wired 277V
TT=Triple-Tap
Wattage
ARCHITECTURAL
AREA LUMINAIRE
2
HID
HPS=High
Site Small
70=70W
Pressure
100=100W
150=150W
175=175W
Compact
Fluorescent
42=42W
Sodium
CF=Compact
Fluorescent
5
7
3
8
4
57=57W
9
Wired 347V
• Two-piece heavy-wall,
die-cast aluminum
housing
UNV=120-277V Universal
Electronic Ballast
• Continuous silicone
gasketing provides IP66
fixture rating
11
14
Options
Accessories
F=Single Fuse (120, 277 or 347V)
Specify Voltage
FF=Double Fuse (208, 240 or 480V)
Specify Voltage
Q=Quartz Restrike
EM=Quartz Restrike with Time Delay
(Also Strikes at Cold Start)
EM/SC=Quartz Emergency Separate
OA/RA1016=NEMA Photocontrol—Multi-Tap
OA/RA1027=NEMA Photocontrol—480V
OA/RA1201=NEMA Photocontrol—347V
VA1047-XX=Direct Wall Mount Kit
VA1048-XX=Wall Mount Kit with 6 3/4" Arm
VA1051-XX=6 3/4" Arm for Square Pole
VA1053-XX=6 3/4" Arm for Round Pole
VA1017-XX=Mast Arm Adapter Kit
VA1019-XX=Single Arm Tenon Adapter for 2 3/8" O.D. Tenon
VA1020-XX=2 @ 180° Tenon Adapter for 2 3/8" O.D. Tenon
VA1021-XX=3 @ 120° Tenon Adapter for 2 3/8" O.D. Tenon
VA1022-XX=4 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
VA1023-XX=2 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
VA1024-XX=3 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
VA1025-XX=2 @ 120° Tenon Adapter for 2 3/8" O.D. Tenon
VA1026-XX=Single Arm Tenon Adapter for 3 1/2" O.D. Tenon
VA1027-XX=2 @ 180° Tenon Adapter for 3 1/2" O.D. Tenon
VA1028-XX=3 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon
VA1029-XX=4 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
VA1030-XX=2 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
VA1031-XX=3 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
VA1032-XX=2 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon
15
• Impact resistant 1/8" thick
tempered clear or
optional frosted flat glass
12
15
12
12
Circuit
• Toolless entry to housing
is provided via two (2)
flush mounted quick
release latches
R=NEMA Twistlock Photocell Receptacle
PC=Button Type Photocontrol
(Specify Voltage)
13
HS=House Side Shield
VS=Polycarbonate Vandal Shield
FR=Frosted Flat Glass Lens
L=Lamp Included
• Ballast and related
electrical components are
mounted to a reinforced
one-piece die-cast
aluminum power tray
• Choice of five (5) high
efficiency segmented
optical systems
constructed of premium
95% reflective anodized
aluminum sheet
• Medium-base porcelain
socket for HID lamp
sources
WATTAGE TABLE
Metal Halide
AES
70, 100, 175W
70, 100, 150W
42, 57W
High Pressure Sodium
Compact Fluorescent
• Housing and arm finished
in a 5 stage premium
TGIC polyester powder
coat paint
NOTES: 1 Arm not included. See accessories. 2 All HID lamps are medium-base. 3 Available in Type 3S, 4S, and 5S distributions only. 4 Nominal M.O.L lamp length of
57W CFL not to exceed 7". 5 Compact Fluorescent ballasts contain internal fusing. No supplemental fusing is necessary. CF ballasts are 120 through 277V.
Specify with UNV voltage designation. 6 Products also available in non-US voltages and 50Hz for international markets. Consult factory for availability and
ordering information. 7 Dual-tap is 120/277V wired 277V. 8 Multi-tap is 120/208/240/277V wired 277V. 9 Triple-tap is 120/277/347V wired 347V. 10 Custom and RAL
color matching available upon request. Consult your INVUE Lighting Systems Representative for further information. 11 Add as suffix in the order shown.
12 Quartz options not available with SL optic. 13 House side shield not available on 5S and SL optics. 14 Order separately, replace XX with color suffix. 15 For use
• Approximate net weight:
35 lbs. (16 kgs.)
1088
COOPER LIGHTING
in down lighting applications only. 16 Specifications and dimensions subject to change without notice.
|